352.796.0229
Push Pier Systems2026-10-27T13:42:55-05:00

Commercial Push Pier Systems in Tampa Bay, Orlando, Miami and Largo

LRE Foundation Repair installs commercial push pier systems to stabilize and raise settling foundations for commercial and industrial buildings.

What Is a Commercial Push Pier System?

Commercial push piers are steel foundation supports driven hydraulically through unstable soil to reach competent load-bearing soil or bedrock. The piers connect to the foundation using engineered brackets designed to transfer structural loads.

Each pier is effectively load-tested as it is installed to verify capacity. Once all piers have reached the required resistance, the system is secured to provide permanent foundation support. Where commercial foundation settlement has resulted in a loss of elevation, a controlled lift may also be attempted when conditions permit.

How Push Piers Stabilize and Lift a Commercial Foundation

The structure’s weight supplies the reaction force used to hydraulically drive steel pier sections through unstable soil. Sections are added until required resistance is reached, so installation depth is set by site conditions rather than a predetermined depth.

Every pier is effectively load-tested during installation to verify capacity. After the piers are set, the building’s load shifts to competent strata, providing permanent stabilization. Where commercial foundation settlement has caused a loss of elevation, the system can also be used to recover elevation when conditions permit.

LRE Foundation Repair Commercial Push Pier Solutions

  • Versatile Foundation Support for Commercial Structures

    Model 288 Push Pier System

    The Model 288 Push Pier System provides deep foundation support for a wide range of established commercial structures. Its sleeved pier design helps improve resistance to bending near the foundation, which makes it a versatile choice when project loads and foundation conditions fall within the system’s design requirements.

    • 2.875-inch diameter steel pier tube
    • External sleeve strengthens the upper portion of the pier
    • Hydraulically driven using the structure as the reaction force
    • Installation depth driven by required resistance and subsurface conditions
    • Each pier is load-tested during installation
    • Suitable for a range of commercial foundation configurations and project requirements

  • Increased Capacity for Heavier Structural Loads

    Model 350 Push Pier System

    For commercial projects with heavier structural demands, the Model 350 Push Pier System provides a larger-diameter foundation support option. The system widens the range of loads push piers can address while preserving the installation advantages of a hydraulically driven deep foundation system.

    • 3.50-inch diameter steel pier tube
    • Built for heavier structural demands than smaller push pier systems
    • Transfers foundation loads into competent bearing strata
    • Driven to the required resistance rather than a predetermined depth
    • Installation provides verification of pier capacity
    • System selection and spacing can be engineered for project-specific loads

  • High-Capacity Support for Demanding Commercial Projects

    Model 400 Push Pier System

    The Model 400 Push Pier System is engineered for demanding commercial foundation applications requiring higher load capacities. Its larger steel pier sections and heavy-duty foundation connection offer a high-capacity option on projects where structural loads surpass what smaller push pier systems can handle.

    • 4-inch diameter steel pier tube
    • Built for high-capacity commercial applications
    • Up to 39,000-lb. allowable system capacity with specified bracket and design conditions
    • Carries structural loads beyond weak or compressible soils
    • Capacity verified as the pier is installed
    • Engineered around project loads, foundation conditions and subsurface conditions

Our Push Pier Installation Process

1.

Expose the Foundation & Install Brackets

Soil is removed to expose the foundation footing at each pier location. A steel foundation bracket is positioned and secured against the existing footing, creating the link between the structure and push pier system.

2.

Hydraulically Drive the Push Piers

Steel pier sections are hydraulically advanced through each bracket using the structure and contributory soil load as resistance. Sections are added until the required drive resistance is reached in competent load-bearing soil or bedrock.

3.

Transfer the Building Load

Once the required resistance is achieved, the building’s load is transferred from unstable soils through the brackets and push piers to competent strata below. Where conditions allow, a controlled lift may be attempted to recover lost elevation.

4.

Secure the System & Backfill the Excavation

After stabilization and any planned lift have been completed, the push pier system is permanently secured. The excavated areas are then backfilled to complete the installation.

Push Piers vs. Helical Piers: Choosing the Right Deep Foundation Solution

Push piers rely on an existing structure’s weight as resistance during installation, making them well suited for many heavier existing buildings experiencing foundation settlement. They are hydraulically driven until the required resistance is achieved.

Helical piers are advanced into the ground with rotational torque and don’t rely on structural weight for installation. This makes them a good fit for lighter structures, additions and new construction. The appropriate system ultimately depends on structural loads, foundation configuration, subsurface conditions and project requirements.

Commercial Push Pier Installation You Can Trust in Tampa Bay, Orlando, Miami and Largo

Specifying the right push pier system starts with understanding the structure, foundation loads and subsurface conditions. LRE Foundation Repair assesses the project requirements and coordinates with the project team to establish the appropriate push pier system, installation criteria and stabilization approach.

Contact LRE Foundation Repair to review your commercial foundation repair project in Tampa Bay, Orlando, Miami and Largo and receive a solution designed around the conditions of your structure and site.

What To Expect

Ready to get started?

Schedule a free estimate to start your repair journey with LRE.

Schedule your inspection

Fill out our form or give us a call to book your inspection. Share what you’ve noticed so we can send the right expert to your home.

Full home
inspection

An expert will inspect the problem area and surrounding conditions, including soil movement, drainage, structural integrity, and any related concerns.

Clear explanation
of findings

We’ll walk you through what we’re seeing in easy-to-understand language so you know the root cause of the issue, not just the symptoms.

Review recommendations

If repairs are needed, we’ll outline your options, pricing, and timeline so you can make the best decision for your home.

Schedule your free inspection—

It'll only take
a minute

Meet with a trusted expert, and get
clear answers about your home.

"*" indicates required fields

1Your Info
2Schedule Your Inspection
3Review & Submit

Customer Information

Don't just take our word for it

See what our customers have to say about our work.

When David from High Springs noticed the floors of his historic home starting to sag, he knew it was time to call LRE. 🏠 Our team at LRE Foundation Repair installed the SmartJack System — a durable, adjustable support solution designed to lift, level, and permanently stabilize crawl space floor joists.

Here’s why homeowners trust LRE’s SmartJack system: ✅ Galvanized steel supports that resist corrosion and won’t settle over time ✅ Restores uneven floors to their proper level ✅ Provides permanent stabilization for long-term protection Now, David’s home is stronger, safer, and ready to stand the test of time. Watch to see how LRE helped preserve the integrity of his historic home — and hear what David had to say about his experience!

David V. | High Springs, FL

Norbert’s driveway, walkway, and front porch in Gainesville, FL had settled over time, creating uneven surfaces and serious tripping hazards that had even caused previous injuries. After contacting LRE Foundation Repair, our team lifted and leveled the slabs with PolyLevel and sealed the cracks with NexusPro for long-lasting protection. Norbert was very pleased with the results and our team’s professionalism.

We’re grateful he shared his experience and helped other homeowners learn about reliable, long-term concrete repair solutions

Norbert M. | Gainesville, FL

When Toby bought his new home in Beverly Hills, Florida, he noticed water pooling along the side of his driveway and in front of his garage, caused by the slope directing water toward the house. Our team at LRE designed and installed a custom exterior drainage system to fix the problem for good. We added an enhanced channel drain in front of the garage, connected it to an underground drainage pipe, and tied in the home’s downspouts to safely redirect water away from the foundation.

Now, Toby’s property stays dry and protected — and he couldn’t be happier with the results!

Toby A. | Beverly Hills, FL

Scott and Carrie from Belleview were preparing to sell their home, but noticed that the cracks in their concrete pool deck were discouraging potential buyers. That’s when they reached out to us at LRE for help.

After our Customer Care team scheduled an appointment with one of our expert Design Specialists, we inspected the pool deck and developed a repair plan using our Two-Part Concrete Protection System — combining PolyLevel to lift and level the slabs, and NexusPro to seal the cracks and prevent future damage.

Scott and Carrie were thrilled with the transformation and the professionalism of our team — and they’re excited to share their wonderful experience! 🎥 Watch their story and see how LRE helped restore their pool deck and peace of mind!

Scott & Carrie D. | Belleview, FL

Christine and Scott in Leesburg, FL, noticed significant settlement inside and outside their home, with large cracks in their walls and tile flooring. Seeking a permanent solution, they turned to LRE Foundation Repair. Our team installed helical piers, interior slab piers, and PolyLevel to fully stabilize their home. Now, they have peace of mind knowing their home’s foundation is finally permanently secure.

Christine & Scott R. | Leesburg, FL

After noticing exterior wall cracks and doors that wouldn’t close properly, Mary knew her home needed help. Previous repairs had failed, leaving her without a lasting solution or a company to stand behind the work. In this testimonial, Mary shares how LRE Foundation Repair permanently stabilized her home and restored her peace of mind with proven solutions, lifetime transferable warranties, and double-backed warranty protection.

Mary Anne S. | Brooksville, FL

When Frank in Spring Hill, FL, noticed cracks in his walls, he turned to LRE Foundation Repair. Our Design Specialist confirmed foundation settlement and designed a plan using helical piers and a new exterior drainage system to stabilize the home and redirect water. With the repairs complete, Frank was thrilled with the results. Watch the video to see how LRE restored his home and peace of mind.

Frank N. | Spring Hill, FL

Patrick from New Port Richey noticed water entering through his home’s slab foundation during last year’s hurricanes and contacted LRE Foundation Repair for help. Our team installed a custom exterior drainage system, including a French drain to collect and redirect rainwater to a relief drain away from the home. We also connected his downspouts directly into the subsurface system to stop water from pooling near the foundation. The result? A dry, protected home — and one very happy homeowner.

🙌 Watch as Patrick shares his experience and see how LRE Foundation Repair helped protect his home from future flooding! 🌧️🏠

Patrick G. | New Port Richey, FL

When Terry purchased his new home in Tarpon Springs, his home inspector discovered a serious issue — the floor joists were being supported by makeshift car jacks! 😬 Looking for a long-term solution, Terry reached out to LRE Foundation Repair. Our team installed the SmartJack® System, providing strong, durable, and permanent support for the home’s floors.

Terry was so impressed with the results that he shared his incredible experience with us! 🙌 🎥 Watch his story to see how we helped restore lasting stability and peace of mind.

Terry C. | Tarpon Springs, FL

When Carin and Jon from Tampa, Florida, noticed buckling in the wood floors of their 1950s historic home, they suspected something was wrong beneath the surface. That’s when they called us at LRE Foundation Repair for a complimentary crawl space inspection. In this customer testimonial, hear directly from Carin and Jon as they share their experience—from the first inspection to the final results. Our expert Design Specialist identified major moisture issues in their crawl space, and our team got to work installing the CleanSpace™ Crawl Space Encapsulation System to create a dry, healthy environment under their home. Watch their story to see how we helped protect their home for years to come!

Carin & Jon B. | Tampa, FL

Before & after photos

Check out before and after photos from some of our completed projects.

  • Concrete driveway repair in San Antonio, FL

    The LRE team utilized our PolyLevel Solution to not only bring the concrete slabs back to an even, safe level but also fill the void underneath and permanently stabilize the driveway.

  • Channel drain solution in Seminole, FL

    The LRE team installed a 4″ channel drain within the pool deck’s concrete to collect rainwater and divert it away from the home through a subsurface drainage system.

  • Crawl space repair in Dunedin, FL

    To repair sagging floor issues, LRE used SmartJacks, made from galvanized steel, and our Crawlspace Encapsulation System to control moisture, air flow, and stabilize the structure.

View All Before & Afters

Proudly Serving Florida

LRE Foundation Repair is the local expert for Foundation repair and concrete repair and more. We proudly service Orlando and all of Florida.

Commercial Push Pier Systems FAQs

Do push pier projects require a structural engineer or a permit? 2026-10-06T09:57:02-05:00

Requirements vary by project and local jurisdiction. Commercial push pier projects usually involve engineered design or review to set loads, pier locations, capacities and installation criteria. Permits and inspections may also be needed. LRE Foundation Repair can help determine the engineering, documentation and permitting requirements that apply to your project.

What do commercial push piers cost in Tampa Bay, Orlando, Miami and Largo? 2026-10-06T09:56:18-05:00

Commercial push pier costs vary based on how many piers are needed and what type, required capacities, installation depths, foundation layout, access and excavation requirements. Mobilization, site constraints, engineering, permitting and restoration also affect total project cost. LRE Foundation Repair can evaluate the structure and project requirements to build a scope and estimate for the recommended system. 

Are push piers permanent, and how long do they last? 2026-10-06T09:55:39-05:00

Push piers are designed as a permanent foundation stabilization solution. The steel components are engineered for long-term structural support, but service life may vary depending on the system, the site conditions, corrosion potential and installation. Project-specific specifications should address any additional corrosion protection or durability requirements for the site.

Will push pier installation disrupt operations at my facility?2026-10-06T09:55:00-05:00

It will depend on the pier locations, access, excavation requirements and the facility itself. Push piers can often be installed using relatively compact equipment and localized excavation, which can help limit disruption compared with more extensive foundation work. LRE Foundation Repair can assess access and sequencing requirements while planning the project. 

How deep do push piers go, and do they have to reach bedrock? 2026-10-06T09:54:18-05:00

There is no standard depth for a push pier. Pier sections are driven until the required installation resistance is achieved, which can occur in competent soil or at bedrock. Actual depths can differ across a single site as subsurface conditions change, so push piers don’t necessarily have to reach bedrock to provide adequate support. 

Push piers or helical piers — which is right for my building? 2026-10-06T09:53:39-05:00

The correct system comes down to structural loads, foundation configuration, subsurface conditions and whether the project involves an existing or new structure. Push piers are frequently suited to heavier existing structures because installation relies on the building as reaction force. Helical piers require no structural weight for installation, making them a fit for lighter structures, additions and new construction.

How do push piers work on a commercial foundation? 2026-10-06T09:52:58-05:00

Push piers stabilize a commercial foundation by transferring the building’s load from unstable soils to competent load-bearing soil or bedrock. Steel pier sections are hydraulically driven to the required resistance and attached to the existing foundation with steel brackets, creating a permanent deep foundation support system. 

Related pages

Service Areas

LRE Foundation Repair proudly serves Orlando and all of Florida.

Resources

Access valuable resources to help keep your home healthy and your family safe.

The LRE Promise

At LRE, we pride ourselves on providing permanent solutions, and stand behind our work with industry-leading, fully transferable warranties and guarantees.

Schedule your free inspection today

Don’t let unanswered questions about your
home worry you any longer.
Go to Top