Surface Pitting & Flaking2026-10-23T13:46:34-05:00

Concrete Repair for Surface Pitting & Concrete Flaking

If you notice that your driveway, patio, sidewalk or garage floor has concrete pitting, flaking or spalling, the surface has started to break down. At LRE Foundation Repair, we help homeowners in communities across FL protect concrete surfaces with SealantPro®, a penetrating concrete sealer that helps limit moisture intrusion and extend the life of your concrete.

When surface damage is addressed early, you can often slow the spread of deterioration and put off premature concrete replacement.

Symptoms

Signs Your Concrete Surface Is Wearing Away

Concrete pitting and flaking often start with small surface changes that become more noticeable over time. Look for a rough, pockmarked finish, small chips that expose the aggregate below or areas where the top layer begins to peel away (concrete spalling). Deterioration tends to appear first along slab edges, steps and other areas that see the most moisture and de-icing salts. If your concrete feels rough underfoot in spots that used to be smooth, the surface layer has likely started to fail.

Causes

What Causes Concrete Pitting, Flaking & Spalling?

Surface damage to concrete doesn't develop overnight. Concrete pitting often begins as small holes or shallow low spots. As deterioration continues, the surface may begin flaking, and in more advanced cases, concrete spalling can occur as larger pieces break away. This damage usually develops after years of moisture, freeze-thaw cycles, de-icing salts and everyday wear. Understanding what's causing the deterioration can help determine whether the concrete can be protected or if more extensive repairs are needed.

  • Poor Concrete Finishing

    Concrete that wasn’t finished or cured properly is more likely to develop surface damage over time.

    If the slab was overworked, finished too early or didn’t cure the way it should have, the surface layer may be weaker than the concrete beneath it. As the slab ages, this thin layer can begin to wear away, exposing aggregate and creating a rough, pitted appearance.

  • Moisture Intrusion

    Water is among the biggest contributors to long-term surface deterioration in concrete.

    Moisture that enters unprotected concrete can carry dissolved minerals, create internal pressure during freezing weather, and slowly weaken the surface. A white, powdery efflorescence often signals that moisture is moving through the concrete and bringing minerals to the surface.

  • Age & Surface Wear

    Years of traffic and weather gradually wear down unprotected concrete surfaces.

    Driveways, patios, sidewalks and pool decks take constant exposure to foot traffic, vehicles, UV rays, rain and changing temperatures. As the surface wears, small imperfections can grow into larger areas of concrete flaking and pitting if left unprotected.

  • Lack of Concrete Sealing

    Unsealed concrete is far more vulnerable to moisture damage and surface breakdown.

    Without a penetrating sealer, concrete readily absorbs water and contaminants that accelerate deterioration. Applying SealantPro® helps block moisture intrusion and can add years to your concrete by protecting it from the inside out.

How Concrete Pitting & Flaking Happens Over Time

  • Stage 1

    Solid, Healthy Concrete

    Concrete begins life with a dense, smooth surface built to resist moisture and everyday wear. When it’s properly protected, it can hold up to years of exposure to weather, traffic, and seasonal changes.

  • Stage 2

    Moisture & Weather Break It Down

    With time, water, de-icing salts, UV exposure and freeze-thaw cycles begin eroding the concrete surface. As water works into the slab, repeated freezing and thawing break down the top layer and accelerate surface deterioration.

  • Stage 3

    Visible Pitting, Flaking & Spalling

    As the surface deteriorates, small pits, chips and flakes start to appear. Left untreated, the damage continues to spread, exposing more concrete to moisture and speeding up deterioration. SealantPro® helps shield concrete from additional moisture intrusion, slowing future surface deterioration and extending the life of the slab.

How It Works

How LRE Foundation Repair Protects Pitted & Flaking Concrete

Benefits

Why Homeowners Trust LRE Foundation Repair

Since 1989, families have trusted LRE Foundation Repair to protect one of their biggest investments with repair solutions designed to last. We believe in addressing the root cause of a problem instead of recommending replacement when a more effective, cost-conscious repair is available. As part of the Supportworks network, we use engineered concrete repair systems that are backed by decades of research and proven performance.

From concrete repair and foundation repair to basement waterproofing, crawl space repair and gutter solutions, LRE Foundation Repair offers comprehensive services to help protect your home from the ground up. Our work is backed by industry-leading transferable warranties, and flexible financing options are available to help make repairs fit your budget.

What To Expect

Ready to get started?

Schedule a free estimate to start your repair journey with LRE.

Schedule your inspection

Fill out our form or give us a call to book your inspection. Share what you’ve noticed so we can send the right expert to your home.

Full home
inspection

An expert will inspect the problem area and surrounding conditions, including soil movement, drainage, structural integrity, and any related concerns.

Clear explanation
of findings

We’ll walk you through what we’re seeing in easy-to-understand language so you know the root cause of the issue, not just the symptoms.

Review recommendations

If repairs are needed, we’ll outline your options, pricing, and timeline so you can make the best decision for your home.

Schedule your free inspection—

It'll only take
a minute

Meet with a trusted expert, and get
clear answers about your home.

"*" indicates required fields

1Your Info
2Schedule Your Inspection
3Review & Submit

Customer Information

Don't just take our word for it

See what our customers have to say about our work.

Before & after photos

Check out before and after photos from some of our completed projects.
  • Concrete driveway repair in San Antonio, FL

    The LRE team utilized our PolyLevel Solution to not only bring the concrete slabs back to an even, safe level but also fill the void underneath and permanently stabilize the driveway.

  • Channel drain solution in Seminole, FL

    The LRE team installed a 4″ channel drain within the pool deck’s concrete to collect rainwater and divert it away from the home through a subsurface drainage system.

  • Crawl space repair in Dunedin, FL

    To repair sagging floor issues, LRE used SmartJacks, made from galvanized steel, and our Crawlspace Encapsulation System to control moisture, air flow, and stabilize the structure.

Proudly Serving Florida

LRE Foundation Repair is the local expert for Foundation repair and concrete repair and more. We proudly service Orlando and all of Florida.

Frequently Asked Questions

How much does concrete pitting and flaking repair cost? 2026-10-05T14:15:23-05:00

The cost to repair pitted or flaking concrete depends on the size of the area, the condition of the surface, and whether additional services are recommended, like NexusPro® concrete caulking for cracks and joints. In most cases, sealing concrete is much more affordable than replacement. The surest way to determine pricing is with a free inspection and written estimate from a LRE Foundation Repair Design Specialist. 

What is SealantPro® and how does it work? 2026-10-05T14:14:44-05:00

SealantPro® is a proprietary penetrating concrete sealer made to protect concrete from the inside out. Rather than creating a coating over the surface, it penetrates deep into the concrete where it reacts within the material to help block water, road salts and freeze-thaw damage. The result is longer-lasting protection that can significantly extend the life of your concrete. 

Can flaking concrete be fixed without replacing it? 2026-10-05T14:14:09-05:00

Yes. In a lot of cases, pitted or flaking concrete can be repaired without replacing the slab. If the damage is limited to the surface, SealantPro® concrete sealing penetrates deep into the concrete to help protect it from additional moisture, salt and freeze-thaw damage. Replacement is typically only necessary when the concrete has extensive structural deterioration, not just surface wear. 

Is pitted or concrete flaking dangerous? 2026-10-05T14:13:40-05:00

Pitted or flaking concrete isn’t typically a structural concern, but it can create safety hazards. Rough surfaces catch shoes, chipped spots can become tripping hazards, and pitted concrete tends to hold water that freezes into slippery patches during colder months. If they’re left untreated, damaged areas allow more moisture into the concrete, causing surface deterioration to spread. 

What causes my concrete to flake and pit? 2026-10-05T14:13:07-05:00

Pitting and flaking in concrete are usually the result of moisture, freeze-thaw cycles, de-icing salts, harsh chemicals and normal weathering. In certain cases, the mix or the finishing work during the original pour also contributes to surface deterioration. These factors break down the top layer of the concrete, causing the surface to become rough, chipped or flaky over time. 

Related pages

Service Areas

LRE Foundation Repair proudly serves Orlando and all of Florida.

Resources

Access valuable resources to help keep your home healthy and your family safe.

The LRE Promise

At LRE, we pride ourselves on providing permanent solutions, and stand behind our work with industry-leading, fully transferable warranties and guarantees.

Schedule your free inspection today

Don’t let unanswered questions about your
home worry you any longer.
Go to Top